Series 3000 - Devices

Mini Priority Monitor Module
	The XP95A Mini Priority Monitor Module is designed to fit into a single gang box behind a manual pull station. It is supplied with flying leads to connect to the terminals of the station.   Model: MPM-830 P/N: 55000-830
	data sheet

Priority Monitor Module
	The XP95A Mini Priority Monitor Module is designed to fit into a single gang box behind a manual pull station. It is supplied with flying leads to connect to the terminals of the station.   Model: PMM-806 P/N: 55000-806
	data sheet

Monitor Input-Output Module
	The XP95A Monitor Input-Output Module is designed to fit into a 4” junction box. The module has 2 modes of operation: (1) monitor any normally open contact fire alarm initiating device (2) function as an output relay closure.   Model: MIO-820 P/N: 55000-820
	data sheet

Sounder Control Module
	The XP95A Sounder Control Module is designed to fit into a 4” junction box. The unit monitors and controls one circuit of notification appliances or switches audio to a voice evacuation speaker circuit.   Model: SCM-825 P/N: 55000-825
	data sheet

Temperature Sensor Head
	The XP95A Temperature Sensor Head is molded from white polycarbonate material with a low air flow resistance design. The sensor monitors temperature by using a single thermistor network.   Model: TSH-450 P/N: 55000-450
	data sheet

Ionization Smoke Sensor Head
	The XP95A Smoke Sensor Head is molded from white polycarbonate material with wind resistant smoke inlets and an insect resistant screen. The Ionization sensor is a dual chamber, single radioactive source system that provides analog readings, which are converted to a digital signal and transmitted to the FACP for interpretation.   Model: ISH-550 P/N: 55000-550
	data sheet

Photoelectric Smoke Sensor Head
	The XP95A Smoke Sensor Head is molded from white polycarbonate material with wind resistant smoke inlets and an insect resistant screen. The Photoelectric system operates on the light scattering principle.   Model: PSH-650 P/N: 55000-650
	data sheet

Multi-Sensor Head
	The XP95A Multi-Sensor head is a combination smoke and heat detector. The detector combines inputs from optical and heat sensors and processes them using a sophisticated algorithm.   Model: MSH-886 P/N: 55000-886

Xpert Card
	The XPert Card is a unique, patented addressing method which provides simple, user friendly and accurate identification of a detector’s location.   Model: XPert-771 P/N: 38531-771

Relay Base
	The Relay Base is a 6” mounting device for the XP95A analog addressable sensors. The Base has a built-in Form C relay.   Model: ARB-RLY P/N: MB-RLY-XP95
	data sheet

Sounder Base
	The Sounder Base is a 6” mounting device for XP95A analog addressable sensors. The base has a built-in piezo sounder.   Model: ASB-SDR P/N: MB-SDR-XP95
	data sheet

Isolator Module with Base
	The Isolator uses a patented technique for recognizing a wiring short circuit by the voltage drop it causes. The isolators “disconnect” the shorted portion of the loop from the rest.   Model: IMB-750 Base: IMB-211 P/N: 55000-750 45681-211
	data sheet

RW-AA Analog Addressable Duct Smoke Detectors
	The RW-AA Duct Detectors provide early detection of smoke and products of combustion present in air moving through an HVAC duct. The device may utilize photoelectric or ionization detector head.   Model: RW-AA-P P/N: RW-AA-P
	data sheet

RW-AR Analog Addressable Relay Duct Smoke Detectors
	The RW-AR Duct Detectors provide early detection of smoke and products of combustion present in air moving through an HVAC duct. The device may utilize photoelectric or ionization detector head.   Model: RW-AR-P P/N: RW-AR-P
	data sheet

Call our Customer Service Department at 732.334.9142 for more information.